"*" indicates required fields
Promix Fine Topcoat Render & Plaster
A ready mixed natural hydraulic lime render and plaster with a fine texture and refined off-white finish for internal and external finish render coats.
"*" indicates required fields
More about Promix Fine Topcoat Render & Plaster
Cornerstone Promix Fine Topcoat is a dry ready mixed render and plaster designed for internal and external finish render coats within an appropriate render system. Available in the colour off-white, which provides a lightly textured finish when floated with a plastic or wooden float or sponge, and a smooth finish with minimal texture when a trowel finish is applied.
Engineered with precision utilising 100% pure natural hydraulic lime, natural sands, and conservation-appropriate additives to create a high-performance render and plaster that withstands high-traffic areas or outdoor elements. Enhanced plasticity supports a decreased likelihood of slump and improved adhesion. Further, a longer open time makes this render straightforward to apply, level, and finish. Available as standard with Saint-Astier® NHL2. Other binders are available upon request.
Well-suited for those looking for a natural and traditional aesthetic or a fine textured external finish.
- Our finest external render in the range
- Popular for mock ashlar finish
- Conservation appropriate additives
- Vapour permeable for improved moisture management
- Features the feel of a modern mortar
- No pigments to prevent colour fading
- No-fuss levelling and finishing
- Increased water retention with decreased slumping
- Minimised likelihood of shrinkage cracking
- Enhanced workability for those behind the trowel
- Extended working and finishing time
- Promotes even curing for an improved bond
Materials:
Natural Hydraulic Lime, Natural Sands, Additives
Mix Ratio:
2:5, others available on request
Binder:
NHL2, others available on request
Aggregate:
1.5mm down blended sand
Work:
Rendering, Plastering
Coverage:
A 25kg bag covers approx. 1.5m2 at 10mm thickness
Yield:
A 25kg bag yields approx. 15 litres
Colours:
Off-White
Use:
Internal, External
Coat:
Topcoat
Standard:
BS EN 998-1: 2016
Fire Rating:
A1
Application:
Manual
Data Validation:
3 months ago
Suitable for internal or external use, where the binder strength is appropriate for the host background or surface.
Relevant for applications including external finishing render coats, typically including float coats and sponged coats within an appropriate render system. Appropriate for various project types, including conservation, renovation, or sustainable construction.
Promix Fine Topcoat can be used as a finer finish coat over Promix Coarse Basecoat, or as the second pass of a two-coat application onto suitable render carrier boards with mesh in the basecoat.
A 25kg bag yields approximately 15 litres of lime render or plaster and covers roughly 5m² at a 3mm thickness. Consumption rates will change based on how even the background is and suction. On-site trials are advised for the best yield indication for your specific project.
As natural products, our kiln-dried sands may exhibit variations in colour, texture, and shape. While these variations are minimal, when colour consistency is crucial, we strongly advise each elevation is completed using material from the same batch.
Supplied in 25kg polythene-lined and colour and batch-coded paper bags for easy identification on-site. Palletised for ease of transport, storage, and handling. FIBC tonne bags are also available.
Do not use in temperatures below 5°C or above 30°C, or if freezing conditions are predicted within the following few weeks, including wind chill. We always advise following best practices for curing and protecting fresh lime renders and plasters. Protect from adverse environmental conditions, including frost, rain, direct sunlight and drying winds.
Store in covered and dry conditions, protected from environmental conditions, including water, damp or frost and clear from the ground. Always reseal packaging if product is still present.
Always read the available documentation before use. See the Download Documentation section below for more detailed product information, application guidance and datasheets.
Related products
Promix Coarse Basecoat Render & Plaster
A render and plaster with a coarse texture and contemporary white coloured finish for basecoats, float coats or as a textured topcoat.
View Product
Promix Medium Topcoat Render & Plaster
A render and plaster with a traditional medium texture and tan coloured finish for internal or external finish coats.
View Product
Promix Superfine Finishing Plaster
A smooth internal finishing plaster with a superfine texture and refined natural white or off-white coloured finish.
View Product